SR SCWR-20 Water Repellent
Rs 2,460 / 20 Piece
Minimum Order Quantity: 50 Piece
| Application Surface | Roofs, Walls, Bricks, Tiles And Blocks |
| Brand | SR |
| Type | Water Repellent |
| Packaging Size | 5L |
| State Of Matter | Liquid |
| Packaging Type | Can |
| Model Name/Number | SCWR-20 R |
Description:
Yes, I am Intrested
- SCWR-20 is a dilutable water repellent sealer specially designed for mineral construction material as well as mineral objects. Its property of water repellency makes the mineral surface last longer.
- SCWR-20 is based on an advanced technology that reacts with atmospheric carbon dioxide to form a protective layer inside the surface of the mineral substrate. This protective layer is responsible for the product’s excellent hydrophobic effect and improves the life as well as the appearance of the mineral substrate.
- Water repellency
- Decreased humidity in the house if applied on roof tiles
- Good penetration
- Breathable
- Improves life of the substrate
- Protects from efflorescence
- Easy dilution with waterSolvent-free
- Environment friendly
- Low-fired clay products immediately after they have been made, e.g. roofing tiles, facing bricks, floor tiles, flower pots, etc.
- Main terrace
- Aerated concrete
- Gypsum and Gypsum-based fiberboards
- Light fillers, such as perlite, vermiculites, and aerated concrete granules
- Painted or colored surfaces
- Clean and dry the surface before application.
- The surface should be free from grease, dirt, moss, algae, fungus, or efflorescence.
- Read the entire label before using
- Test patch a surface before application.
- Dilute the product before applying in the ratio of 1:20 (1 parts SCWR-20 and 20 parts water)
- Spraying the product on the surface is the preferred method of application for facing bricks and floor tiles.
- Dipping the substrate in the product for 30 to 60 sec is the preferred method of application for roof tiles and flower pots.
- The surface on which the product is applied should stay dry for 24hrs after application.
- The product starts curing within few hours of application and is completely cured after 24hours of application and is ready-to-use.
- By using water with soap or detergent
- Best before the date mentioned on the batch.
- In case of cream formation, brief stirring will restore the original form.
- Don’t keep it in direct sunlight.
- Tight pack the container after use to maintain the product quality.
- Don’t use the product after 24 hrs of dilution.
- The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is user’s responsibility to check the substrate and compatibility or suitability of the product for deemed application. For further information or for any query, Please consult your local Shrinath Chemicals representative.
